Services (1:34 video). Open on its own page
One job, several visits
Some jobs take more than one visit: a green-to-clean needs daily visits for a few days and then a few a week until the water holds, a new plaster startup needs brushing every day for two weeks, and a pool opening usually gets a couple of startup checks. A visit plan puts all of those visits on one work order, with one price and one invoice. Pool Founder books the visits for you, so you no longer create a separate "Follow up" work order after each visit.
Visit plan or Repeats? A visit plan is several visits close together that make up one job (daily, or a few times a week). Repeats is for a job that comes back every few weeks or months, like a filter clean every 6 months, where each time is its own work order and its own invoice. A work order has one or the other, not both.
Add a visit plan
You can add a visit plan in two places:
- On a service, so every work order created from it starts with the plan: sidebar → Services → Services, open the service (or click New service and pick Multi-visit work order, which opens with the plan turned on), and use the Visits section. A service with a visit plan shows the Multi-visit work order badge.
- On one work order: Create Job → Work Order, under the deposit options, next to Repeats. Starting the work order from a multi-visit work order service (under Start from a service) fills it in. Unchecking Visit plan before saving makes that work order a single visit.
- 1Check Visit plan. If Repeats is on, turn it off first; the checkbox says "Turn off Repeats to use a visit plan."
- 2Build the steps. They are numbered cards on a timeline, each with its visit count ("3 visits"). Pick the step type with the switch on the card: Every day ("Every day for 3 days in a row"); Per week ("3 visits a week for 2 weeks"), spread over the week (2 a week: Mon/Thu; 3 a week: Mon/Wed/Fri; 4 a week: Mon/Tue/Thu/Fri; 5 a week: every weekday); or Once later ("One visit 7 days after the visit before"), for a final check. Optionally click Name this step at the top of the card and type a name like "Shock and brush" or "Final check". Add step adds another (up to 6); the × on a card removes it. For a ready-made plan, add a starter service instead (see Starter services below).
- 3Pick how visits are booked under Booking: Book every visit up front or Book each visit as you go (see below). On a work order, pick how the tasks work under Tasks too (see Tasks on a visit plan below).
- 4Turn on Include weekends if visits may land on Saturday and Sunday. Off, every visit lands Monday to Friday, and a visit that would fall on a weekend moves to Monday.
- 5Optionally pick a recurring service under When it's done, offer (optional), for example your weekly service after a green-to-clean. It lists only recurring services.
- 6Check the preview beside the steps (below them on a phone): the total ("10 visits, one invoice"), a week-by-week calendar with a dot on each visit day, colored by step, as if the first visit were today, and a key with each step's name and visit count. Then save.
A plan has at least 2 and at most 60 visits. Without weekends, a step can have at most 5 visits a week.
Book every visit up front, or as you go
Either way, you only schedule the first visit, the same way as any work order: on the work order's Schedule page, from Work orders to schedule (Schedule, Bulk Schedule, Best fit), or by asking George. Pool Founder books the rest.
On the work order's Schedule page, a work order with a visit plan and nothing booked yet says Pick the technician and the day of the first visit, and the calendar takes one day: clicking another day replaces it. If the plan doesn't include weekends, Saturday and Sunday can't be picked. A teal Visit plan box above shows the plan and, once a day is picked, "First visit: Wed, Oct 14 with Alex" plus every visit's date from that day and a week-by-week calendar. With Book every visit up front, all of those dates are booked when you click Schedule; with Book each visit as you go, only the first is, and the later dates are a guide. Once the plan is under way the box reads "Visit plan: visit 4 of 10", the booked visits are selected on the calendar, and unselecting one day and picking another moves just that visit. The page never books more visits than the plan has left: with every remaining visit booked, unselect a day first, then pick the new one.
- Book every visit up front: as soon as the first visit is booked, every other visit in the plan is booked for the same technician, on the plan's days counted from that first visit. Best when the dates are fixed, like a plaster startup. If you book several days yourself, nothing is added. After that, moving or removing visits is up to you: Pool Founder never puts a removed visit back.
- Book each visit as you go: only the next visit is ever booked. Each time a visit is logged, the next one is booked for the technician who did that visit, keeping the plan's spacing from the day the visit really happened (a visit done a day late moves the rest a day), never earlier than today. If a visit is already booked ahead, nothing is added. Best when the job can end early, like a green-to-clean.
A plan never keeps more visits booked than it has left. A visit logged on a day that wasn't booked (logged from the office, or a technician working ahead) uses up the plan's last booked visit, and once every visit is logged the remaining bookings come off the schedule. If the next visit can't be booked (the visit was logged without a technician, the technician was removed, or the work order is waiting on parts), the work order waits on Work orders to schedule until someone books it. Booked visits are ordinary stops: the technician sees each one on their route in the mobile app, and you can move or transfer a single visit like any other stop.
Tasks on a visit plan: every visit, or one list for the job
A work order with a visit plan has one task list, and you choose how it is used. On a multi-visit work order service it is in the Tasks section; on a work order it is under Tasks inside the visit plan box.
- Same tasks every visit (the default): the technician gets the whole list on every visit and checks it off fresh each time, like a green-to-clean where every visit is test, shock, brush and vacuum. The work order is Completed once every visit in the plan is logged; a task skipped on one visit does not hold it open. Tasks set to every N weeks still come up only every N weeks. The job page counts tasks done on the last visit ("5 of 7 tasks done on the last visit"), and the Tasks tab grid shows each visit as a column.
- One list for the whole job: the list is done once across the visits, like an opening with a few startup checks. A task checked off on any visit stays done; on later visits the technician app shows it as "Not due this visit" (it can still be checked again). The work order stays In progress until every visit is logged and every task is done.
A work order without a visit plan always has one list for the whole job: if it takes an extra trip, the return visit shows the tasks already done as "Not due this visit". Work orders made from a service copy its choice. Different tasks on different visits of the same plan (for example acid wash only on visit 1) is not available; mark occasional tasks Optional instead.
Follow progress and finish early
A work order with a visit plan shows a teal visit plan card on its Overview tab, below Notes for next visit: Visit 4 of 10 (with the next step's name, if it has one), a bar with one segment per visit, the plan, and the days already booked ("Booked: Wed, Sep 16, Fri, Sep 18").
The work order stays In progress until every visit in the plan has been logged (and, with One list for the whole job, every task is done), even when nothing is booked ahead, and then it is Completed and ready to invoice like any work order. One work order means one invoice for the whole plan, priced by its line items.
Water clear early? On the work order's page, click More actions (⋯, top right) and choose Complete Work Order. It closes the work order and takes the visits left off the schedule. The card then reads "Finished after 5 of 10 visits".
If the plan names a follow-up recurring service, the finished card shows "Next step for this pool: Weekly Pool Service" and a Start Weekly Pool Service button. It opens Create Recurring Service with the customer, the pool, and that service already filled in. Nothing is created until you save it.
Starter services
Instead of building each service from scratch, you can add ready-made ones: sidebar → Services → Services → Starter services (with no services yet, the empty page also has Start from common pool jobs). Check the ones you sell and click Add services. Each one comes with its visit plan or Repeats rule and its time at the stop. Prices are left blank, so the card shows Set a price until you open the service and enter yours.
- Several-visit programs: Green to Clean - Light (6 visits), Medium (10 visits) and Severe (15 visits), each booked as you go; New Plaster Startup (14 days in a row including weekends, then a weekly balance check for 2 weeks, booked up front); Vacation Service (2 visits a week for 2 weeks).
- Seasonal: Pool Opening (the opening plus two startup checks over the next few days, booked up front) and Pool Closing / Winterize.
- Repeating add-ons: Filter Clean - Cartridge and Filter Clean - DE (repeat every 6 months), Filter Clean - Sand (every year), Salt Cell Clean (every 3 months).
- Single visits: Service Call / Diagnostic, Equipment Repair, Acid Wash, Drain and Clean, Tile Cleaning, Leak Detection, Storm Cleanup, Home Sale Inspection.
A starter whose name you already use shows "Already added" and is skipped; one you archived shows "Archived: restore it from the Archived view" instead of being added twice. After adding, each is a normal work order service: rename it, change its plan, add tasks, or archive it.
What visit plans don't do
These do not exist in Pool Founder: a price per visit that grows with the number of visits done (the work order is one price; to charge per visit, use a line item with a quantity); a visit plan on a recurring service (maintenance already repeats on its route; for 2 visits a week year-round, use visits per week on the recurring service); changing the plan of a work order that already exists (move, add, or remove its booked visits instead, or create a new work order); setting a visit plan from the technician mobile app (plans are set on the web; the app shows each booked visit as a stop with a card saying which visit it is, like "Visit 4 of 10"); showing visit progress on the customer's service report; booking each visit with a different technician automatically (it is one technician; transfer single visits by hand); visits more than once a day; and starter recurring services (starter services are all work orders (formerly called one-time services); recurring services are set up in guided setup or with New service on the Services page).
Frequently asked questions
Where is diagnosis in the catalog? Is there a diagnostic or service call service?
Yes: Service Call / Diagnostic ("Find out what is wrong with equipment or water.", one visit, 30 minutes at the stop) is one of the starter services. If it is not on your Services page yet, open sidebar → Services → Services → Starter services, tick it under Single visits and click Add 1 service (or ask George to add it). Its price starts blank: open it and set your diagnostic fee. After that it is in Start from a service on New Work Order and Create Quote.
Does the tech do the same tasks on every visit of a green-to-clean?
Yes, by default. A visit plan set to Same tasks every visit gives the technician the whole list on each visit, checked off fresh each time. Pick One list for the whole job instead when the tasks only need doing once across the visits; then a task done on any visit stays done.
How do I set up a green-to-clean that is 3 visits a week for 4 weeks?
Open the service on the Services page (or Create Job → Work order), check Visit plan, set the first step to Per week, 3 visits a week for 4 weeks, and pick Book each visit as you go (or up front). That is 12 visits on one work order with one invoice. Schedule the first visit and the rest are booked for you.
The pool cleared early. How do I stop the remaining visits?
On the work order's page, click More actions (⋯, top right) and choose Complete Work Order. It closes it for invoicing and removes the visits still booked.
Why is my green-to-clean still In progress with nothing scheduled?
A visit plan stays in progress until every visit is logged. With Book each visit as you go, the next visit is booked when a technician logs a visit; if it could not be booked, the work order waits on Work orders to schedule. Book it there, or click Complete Work Order if the job is done.